An Immersion Water Heater is an electric device that is installed in a vessel to heat a liquid. The installation can be threaded, flanged or over-the-side.
Over-the-Side Immersion Heaters:- Over-the-side Immersion heaters are manufactured for the containers where the Immersion Water Heater cannot be easily installed through the side. This kind of heater is installed all the way through the top of the container with the heated part of the unit at the bottom or along the side of the tank. The natural circulation of the liquid inside the container allows equal distribution of heat. Lead wires or terminal houses are given for power connection. These heaters are designed with the heating components made up of stainless steel, steel, copper, titanium, cast iron, and PFA coating. A broad selection of shapes, kilowatt ratings, and mounting processes are presented to suit several diverse applications. Water, solvent, oil, salts, plating baths, and acids are a few viscous materials and liquids that are commonly heated using immersion rods. Over-the-side immersion water heaters permit easy removal, portability, simple cleaning technique, and ample area or space to show its working in the tank after installation.
Flanged Immersion Heater:- Flanged immersion water heaters comprise of the hairpin bent tubular components brazed or welded into a flange and attached with wiring boxes for the electrical connections. These kinds of heaters are installed by scramming to matching flange brazed to the wall of the tank or the nozzle. A broad range of flange kilowatt ratings, sizes, terminal housings, voltages, and sheath materials make these devices perfect for every type of heating application. Flanged immersion rods are considered to be one of the most broadly used techniques for heating water or any liquid including the corrosive solutions. These heaters are designed for using in pressurized vessels and tanks. These are quite simple to install. The method of direct immersion is quite energy efficient and can be controlled and monitored with ease. These are also termed as the through-the-side immersion water heaters and are utilize the standard pipe flanges ranging between 3 inches to 14 inches in diameter for supporting the high liquid pressure in the tanks. These devices are installed all the way through a matching or a complementing companion flange, accessible from the nearby industrial supply houses to the wall of the tank. A great range of heating outputs, watt densities, and flange ratings and sizes make this device an outstanding heater for every irregularly shaped vessel, vats, or tanks.
Screw-Plug or Threaded Immersion Water Heaters:- The Screw-plug or threaded Immersion water heaters comprise of hairpin bent tubular components welded or brazed into a screw plug and affixed with wiring boxes for providing the electrical connections. These types of immersion rods are directly screwed via a threaded opening in a container wall or via matching pipe coupling, welding flange, or half-coupling. The sizes of the heaters are designed with half inch, three-fourths inch, one inch, two inches, and two-and-half inches pipe threads. A wide range screw-plug sizes, sheath materials, kilowatt ratings, voltages, thermostats, and terminal housings make the compact heaters perfect for every application. Heat transfer solutions and oils can be heated using these simple controlling units.
The best Home Appliances Website incorporates all of the above immersions rods at the best prices. Browsing the entire range can help the buyer to get the right one.